Should I choose a horizontal or vertical iron chip cake press? How to choose?

The iron chip cake press is suitable for the manufacturing industries such as automobile parts, motorcycles, railway machinery, and molds. It is mainly used to compress iron chips, reduce the accumulation volume, and collect the waste liquid in it to keep the environment clean and pollution-free. So how to choose an iron chip cake press? Is it a vertical or horizontal type? The following editor will give you a detailed introduction.

The iron scraps waste generated by the general manufacturing industry contains a large amount of cutting fluid in addition to metal scraps. This cutting fluid is a hazardous waste and will be strictly reviewed by the environmental protection department, so it is necessary to ensure the sealing of the treatment process to prevent the leakage of the cutting fluid and cause secondary pollution. Therefore, it is more appropriate to use a horizontal iron scrap cake press for this type of iron scraps containing cutting fluid.

The vertical cake press has lower sealing than the horizontal cake press and is easy to operate. If the company has a high output of iron chips and high processing capacity requirements, it is recommended to choose a vertical type.

Generally, when choosing a chip cake press, there are not many cases of configuring a single device, and most of them need to be used together with other equipment. If the chip is in the form of filaments or lumps, a crusher needs to be configured for early crushing to ensure the later cake pressing effect; if the output is relatively large, a silo needs to be configured for centralized storage; there are also equipment such as elevators and conveyors. In short, the chip cake press needs to be configured according to the actual material and output. Consulting relevant business personnel is a hassle-free and worry-free choice!

Through the above introduction, I believe that everyone has their own judgment on the choice of chip cake press. Only by clarifying their own needs can they have a clear direction in selection and purchase, and configure the equipment that suits them.